You searched for nux - Page 2 of 7 - Music Machine - Musical Instruments NZ

NUX NDL-5 JTC Drum and Loop PRO Pedal

The NUX NDL-5 JTC Drum and Loop PRO Guitar Pedal is an advanced pedal with simplified controls. It’s a dual switch stomp box with 6 hours of recording capability and 256 loop track memories. It has independent controls for the looper and the drum: left footswitch (LOOP) controls recording, overdub, and start/stop of the looper. This switch also features NUX Smart TAP function, which automatically detects whether you want to control the looper or to set the tempo of the drum.

There are 2 different loop recording actions on JTC Pro; Record and Play (RP), and Record and Overdub (RD).

NUX NDL-5 JTC Drum and Loop PRO Pedal Read More »

Nux NAP-5 Stageman Floor Acoustic Preamp & DI

Nux NAP-5 Stageman Floor Acoustic Preamp & DI – NUX Stageman Floor is an analog acoustic preamp with digital effects and looper function. Preamp featured with a highly sensitive 3-band EQ with MID scoop toggle switch, adjustable notch filter, and input gain control. And it provides a ginormous headroom which delivers the sound all natural.

High-Quality Effects, Easy Control
It equipped with Chorus and Reverb effects and, each effect designed to control by only one-knob, when you tweak the chorus or reverb knob from 0 to 10 it adjusts multiple parameters with a perfect balance. And the chorus switch has another function, while you push and hold, it will activate the freeze effect until you release it.

Nux NAP-5 Stageman Floor Acoustic Preamp & DI Read More »

NUX NBK-5 Masamune Booster & Compressor Pedal

NUX NBK-5 Masamune Booster & Compressor Pedal – Booster and Compressor Pedals are the guitarist’s secret weapon. Both pedals are now available in the NUX NBK-5 Masamune Booster and Compressor Pedal, and it comes with selectable signal routing.

Both pedals are now available in one convenient metal housing, and it comes with selectable signal routing. The Boost Section comes with Boost Level, Drive, and Hi-Cut controls. The Compressor Section comes with Komp Level, Sustain, Blend, and Clip controls. The Masamune has an external foot-switch jack Input, you can easily operate the pedal by using an additional remote switch.

NUX NBK-5 Masamune Booster & Compressor Pedal Read More »

NUX Loop Core Stereo Pedal

NUX Loop Core Stereo Pedal – After covering the basics with NUX’s previous loop pedal, they have gone one step further to bring you the Loop Core Stereo pedal that does more than just playback your tracks. The new innovative features in this pedal include 40 built-in drum patterns for you to playing along with, 99 personal user memories, and handy user assists to get the most out of your experience. No matter where you’re playing, this handy little looper will get the job done.

To get that perfect loop, NUX have integrated an auto-start mode that waits until you play your guitar to record, meaning you no longer have to think about hitting the pedal at the same time giving you more flexibility when creating the right loop. The NUX Loop Core pedal is the perfect next upgrade for you to be able to record and overdub as many layers as you desire to create an incredible sounds and tracks when recording by yourself.

NUX have made it easier than ever to add previously recorded tracks to a loop you want to play along to. Using the NUX Audio Converter Software you can drag and drop WAV files to either develop samples or improvise on top of your favourite songs.

NUX Loop Core Stereo Pedal Read More »

NUX Verb Core Deluxe Reverb Pedal

NUX Verb Core Deluxe Reverb Pedal – The NUX Verb Core Deluxe has infused 8 great reverb pedals to give you a large palette of different effects. Using the Type knob, you can change between which of the 8 effects you desire.

NUX Verb Core Deluxe Reverb Pedal Read More »

NUX B-8 Wireless System

The NUX B-8 wireless system fits all types of electric guitar, electric-acoustic guitar, bass guitar, and various instruments with electronic pickups. No matter what instrument you play, you can enjoy the convenience with B-8 wireless. The user-friendly matching system makes it easier to use, just turn on the TX&RX and it will be paired within a couple of seconds. Each wireless set has a unique pairing algorithm, it automatically detects each other and configures their own IDs.

B-8 Wireless delivers the signal on 2.4 GHz frequency range. That’s a global interference-free broadcasting range you can use everywhere without a signal break. With the 24-bit 48 KHz audio quality you will never experience unwanted sound degradation.

With the latest transmitting technologies, the B-8 wireless system has the best performance for musicians. The operation range is up to 50 meters (160-feet). And, the latency is as low as 2.5ms when you set the transmitting at LOW LATENCY.

It also comes with a build-in booster and well-designed digital tuner with Chromatic, Guitar Standard, Guitar Compensated, Bass tuning modes, which are very useful for musicians to perform with on stage.

Output Options

With the 1/4”OUTPUT/SEND jack, you can loop your effect pedals to RX with this jack for SEND (send the signal to your effect pedals), and loop your effect pedals to RX with the 1/4”RETURN jack for RETURN (return the signal to from your effect pedals to the RX). With the DI OUT jack, you can connect the RX to an amplifier, a mixer or an audio interface with a balanced cable .

Tech Specs

Operating Frequency Band

2400-2483.5MHz
Audio Quality

24bit/48kHz
Frequency Response

20Hz-20kHz
Latency

2.5ms(best performance setting)-8.7ms(safety mode)
Input Impedance

1 MΩ
Maximum Input Level

1 kHz at 1% THD +6.2 dBV (5.78 Vp-p)
Dynamic Range

122dB, A-weighted(OUTPUT/SEND)
Output level Adjustment Range

mute -64dB~0dB
Built-in Battery Capacity

3.7V/500mAh Rechargeable Li-polymer (Transmitter)
TX Battery Life

up to 6.5 hours
Operation Range

Up to 50 m (165 feet) maximum

NUX B-8 Wireless System Read More »

NUX Metal Core Deluxe MkII Distortion Pedal

NUX Metal Core Deluxe MkII Distortion Pedal – The NUX Metal Core Deluxe MKII is a high gain preamp pedal that gives you all the metal you need in one compact pedal. “You can’t destroy the Metal!” The Metal Core Deluxe MKII has 3 great whopping sounding replica preamps for you to select from. Utilising NUX’s Impulse response, you can go ampless as it simulates the projection a cabinet would give you.

NUX Metal Core Deluxe MkII Distortion Pedal Read More »

NUX Boost Core Deluxe Pedal

NUX Boost Core Deluxe Pedal – Now you can drive your amp to boost with the Boost Core Deluxe’s gain knob, then sweeten or subdue your treble and bass frequencies with the on board 2-band EQ. Boost Core Deluxe is handy enough as a standalone boost and an EQ pedal. With analogue circuitry and tone enhancement, the Nux Boost Core Deluxe provides huge capabilities for a great price. Drive the booster into your favourite overdrive and let it raise the sonic mayhem!

NUX Boost Core Deluxe Pedal Read More »

NUX NDL-3 Hook Drum and Loop Pedal

NUX NDL-3 Hook Drum and Loop Pedal – The HOOK Drum & Loop (NDL-3) is a mini looper pedal with auto tempo detection. Simply record a phrase loop, then add a synchronized drum beat. Or you can use the included Smart Tap Tempo and play the drum beat, then start to record the phrase loop. The HOOK is intelligent and simple to operate. When recording your phrase loop, you can choose Normal Recording or Auto Recording. Normal Recording (NR) is like regular looper pedal, while you press the footswitch, it starts to record immediately. When in Auto Recording (AR) mode, press the footswitch to record arm the looper. HOOK will start recording once it detects your guitar signal. This is convenient while you put the HOOK on the desk, and you can use your hand instead of your foot to operate it. Even without the phrase loop, the HOOK can be used as a drum beat with smart tap tempo. It offers 11 drum beat styles with high quality sound samples, and useful rhythms for practice.

NUX NDL-3 Hook Drum and Loop Pedal Read More »

NUX NCH-3 Voodoo Vibe Mini Pedal

NUX NCH-3 Voodoo Vibe Mini Pedal – The Voodoo Vibe (NCH-3) from Nux is a mini-Uni-vibe pedal with 2 different modes, Vibe and Chorus, that you can switch between by holding the footswitch. NUX’s modern-tech DSP yields a perfect combination of both analogue and digital. Unlike the original Uni-vibe, now you can power the Voodoo Vibe with 9V instead of 18V. Using DSP technology, NUX is able to offer a mini pedal with Smart Tap Tempo function. Also, it’s easier to enhance the Chorus mode without volume drop issues in the digital world, while still retaining the same good vibes and analogue sound. It also supports Stereo input & output.

NUX NCH-3 Voodoo Vibe Mini Pedal Read More »

Search Results for: nux